Make and model
Custom
Description
# KT66 powered 1968 Marshall JMP style amp. These profiles are of my own Marshall Plexi style amp that I built in 2015. It is practically a 1968 spec Marshall Plexi circuit but the power section was modified to use KT66 valves. because I only had a JTM45 output transformer. It currently has Genalex Gold Lions in it. Preamp valves are a mix of NOS and modern 12AX7s. The amp can be set to JTM or JMP Negative feedback values, JTM or JMP Tonestacks as well as Valve or diode rectification. I've included a Lite model for those on Pi's, it sounds basically identical to the std one. Please send feedback here: https://www.facebook.com/groups/neuralampmodeler/permalink/7465244353524323/ # Amp settings Plexi Channel 1 (bright) high input Volume 1: 7 Volume 2: 0 Presence: 3 Bass: 3 Mids: 7 Treble: 7 Lead (JMP) tonestack High (JTM) negative feedback Diode Rectifier # Signal Chain Reaper >> Hotone Ampero II Stomp >> Amplifier >> Two Notes Captor 8 >> Ampero >> Reaper # Training 500 Epochs, Standard Architecture: ESR: 0.0063 500 Epochs, Lite Architecture: ESR: 0.0088 # Note This is the same amp settings as my other upload but I improved my process, the profile should now play more or less correctly for most people with NAM input gain set near 0 (I have to boost my Ampero USB signal by 14dB to match this)
License
CC BY:This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use.
* NAM Online is an external 3rd party service/website not related with Tonehunt. For support, please visit their website at https://thenam.online
